Myrtle Beach Roofing 2

How To Mount Solar Panels On Your Roof

It is not hard to learn how to mount solar panels on your roof and mount them without professional assistance. While you can hire an installation expert to do the work, it can be quite expensive. A homeowner can save a lot of money by doing the installation work on his or her own.

You should start by deciding what type of solar panel installation job you want to do. One can install the panels flush on the roof, install them at an angle or install a adjustable roof mount device first and then install the panels on this device. The last option is the best, as it enables a homeowner to adjust the angle so that the panels will always get as much sun as possible.

Next, you will need to determine where you want your solar panels installed. In order to get the most out your panels, you will need to install them on the part of the roof that gets the most sunlight. You will want to install them facing towards the east, as the sun rises in the east. If there are trees blocking the sun from sitting the eastward side of the roof, then these should be trimmed back.

The panels must be attached to the rafters so that they will remain steady and in place. Once you have found the rafters using either a laser light or stud finder, you will want to make a chalk marking to note where each mount should be placed. A person will then need to pre-drill the hole and install the mounts using stainless steel lag bolts. Be very careful as you do this, as you do not want the rafters to crack or break.

Once you have put in the mounts, you will need to put in metal flashing over the mounts and seal the mounts with tar. You will then need to secure the metal rails to the mounting posts. If your roof is tiled, you will need to cut a hole into the tile so that the tile can be properly fitted over the mounting bracket. The area would then need to be sealed with tar. Then install the solar paneling on the brackets.

A homeowner who has a solar panel battery should then connect it to the installed panels. Then, the only job that will need to be done is to connect the panels to the inverter. While solar panel installation is reliably straightforward, electrical wiring is not and one may want to have this aspect of the work done by a professional.

You will find that learning how to mount solar panels on your roof is time well spent, as you save a lot of money that would have been spent hiring a professional to do the work. A person who wants to install his or her own solar panels will need to start by purchasing the right tools. Some important tools that you will need in order to install solar paneling on your roof include a drill, wrench, tar and heater and a stud finder. Then take the time to do the job right and make sure your panels are not only installed securely but are also able to get as much energy as possible.

roof cost